Several Methods of Operation for Ultrasonic Plastic Welding

Update:16 Oct 2017

   1, welding ultrasonic vibration with the welding head will be ultrasonic conduction to the weld, due to the two welding parts at the large resistance, resulting in local high temperature, so that welding interface melting. Under a certain pressure, so that the two welding pieces to achieve beautiful, fast, strong welding effect.
2, buried nuts or other metal to be inserted into plastic parts. First, the ultrasonic transmission to the metal, the high-speed vibration, so that the metal directly embedded in the molding of plastic, while the plastic melting, the completion of the completion of the buried.
   3, riveting method to metal and plastic or two different nature of the plastic joint up, you can use the ultrasonic riveting method, so that welding is not easy brittle, beautiful, strong.
   4, spot welding using a small welding head will be two large plastic products sub-point welding, or the entire row of tooth-like welding head directly on the two pieces of plastic parts, so as to achieve the effect of spot welding.
   5, forming the use of ultrasonic plastic parts instantly melt molding, when the plastic solidification can make metal or other materials, plastic solid.
   6, the removal of the use of welding head and the base of the special design, when the plastic workpiece just shot, the pressure directly on the plastic branches, through the ultrasonic conduction to achieve the effect of excision.